NPA Hair & Body Conditioning Shampoo

By: TOM BRANNA

Editor

Ingredients

%

Phase A

Water, demin.
40.9

0

Keltrol CG-SFT (CP Kelco) (Xanthan gum)
1.2

Veegum Pure (RT Vanderbilt, Inc.) (Magnesiumaluminum silicate)
1.3

Jaguar C 13 S (Rhodia) (Guar hydroypropyltrimonium chloride)
0.2

Glaudin WP (Cognis) (Hydrolyzed Wheat Protein)
0.2

Citric acid (50%)
q.s.

Plantacare 2000 UP (Cognis) (Decyl glucoside)
22.0

Plantapon ACG HC (Cognis) (Sodium cocoyl glutamate)
7.0

Lamesoft PO 65 (Cognis) (Coco-glucoside (and)glyceryl oleate)
3.0

Citric acid (50%)
q.s.

Euperlan Green (Cognis) (Lauryl glucoside (and) stearylcitrate)
4.0

Perfume
0.1

Preservative
q.s.

Phase B

Water, demin.
13.0

Phase C

Plantasil Micro (Cognis) (Dicaprylyl ether (and) decyl glucoside (and) glyceryl oleate)
7.1

Phase D

Citric acid (50%)
q.s.

Procedure

Mix powders of phase A as dry blend and add it to the water of phase A while stirring. Adjust the pH with citric acid to pH less than 6.0, mix with moderate agitation for approximately 60 minutes to get a homogenous gel. Add the ingredients of phase B to a separate vessel, heat to 50°C and stir until it is uniform. Adjust the pH with citric acid to pH less than 6.5. Then add phase B to phase A. Cool to 40°C while stirring. Add one ingredient after the other of phase III below 40°C. Add phase D to adjust final pH to pH 4.7-5.3.